Skip to content

Interlayer Tech

cnc@cncglass.com

THERMOCUTTER heads for glass eva interlayer remains trimming

Posted bycnc@cncGlass.com EVA film glass interlayer November 30, 2015

THERMOCUTTER heads for glass eva interlayer remains trimming (8)

THERMOCUTTER heads for glass eva interlayer remains trimming (9)

THERMOCUTTER heads for glass eva interlayer remains trimming (10)

website CNC GLASS INTERLAYER

THERMOCUTTER heads for glass eva interlayer remains trimming (1)

THERMOCUTTER heads for glass eva interlayer remains trimming (2)

THERMOCUTTER heads for glass eva interlayer remains trimming (3)

THERMOCUTTER heads for glass eva interlayer remains trimming (4)

THERMOCUTTER heads for glass eva interlayer remains trimming (5)

THERMOCUTTER heads for glass eva interlayer remains trimming (6)

THERMOCUTTER heads for glass eva interlayer remains trimming (7)

Posted bycnc@cncGlass.com EVA film glass interlayerNovember 30, 2015Posted incnc@cncGlass.com EVA film glass interlayer

Published by cnc@cncGlass.com EVA film glass interlayer

cnc@cncGlass.com EVA film glass interlayer View more posts

Post navigation

Previous Post Previous post:
GLAZING SAFETY INTERLAYER FILM SAMPLES EVA
Next Post Next post:
THERMOCUTTER heads for glass eva interlayer remains trimming hot knife

Recent Posts

  • SGP TRIMMER, heavy duty heat cutter hot knife (4) December 19, 2019
  • Vacuum tape for glass lamination，cover entire gap between two glass sheets with tape December 13, 2019
  • Reusable Silicone bag for eva sgp glass lamination vacuuming October 23, 2019
  • Reusable Silicone bag for eva sgp glass lamination vacuuming October 23, 2019
  • (no title) March 12, 2019
  • (no title) March 12, 2019
  • (no title) December 6, 2018
  • CNC02-Continuously-Working Thermal Cutter is available for high point temperature adjustment, 16 sections of temp to set. Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncGlass.com www.cncEVA.com Differences between CNC02 and CNC01: *CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot. *CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks. *CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g. *CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost. December 6, 2018
  • (no title) December 6, 2018
  • (no title) December 4, 2018
  • (no title) December 4, 2018
  • (no title) December 4, 2018
  • CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot. Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncGlass.com www.cncEVA.com Differences between CNC02 and CNC01: *CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot. *CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks. *CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g. *CNC02-Continuously-Working is availabe for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost. December 4, 2018
  • Edges Cleaning hot knife for SGP PVB laminated safety glass Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 November 1, 2018
  • (no title) June 24, 2017
  • (no title) June 24, 2017
  • polyester green tape September 17, 2016
  • (no title) September 17, 2016
  • THERMOCUTTER heads for glass eva interlayer remains trimming hot knife November 30, 2015
  • THERMOCUTTER heads for glass eva interlayer remains trimming November 30, 2015
  • GLAZING SAFETY INTERLAYER FILM SAMPLES EVA September 7, 2015
  • Eva thermal trimmer for eva glass interlayer film June 25, 2015
  • EVA glass laminating interlayer film Ethylene Vinyl Acetate (transparent royal blue foil).jpg April 21, 2015
  • EVA glass laminating interlayer film Ethylene Vinyl Acetate (transparent orange yellow).jpg April 21, 2015
  • Thermal Cutter Trimmer for cleaning interlayer remains of laminated glass edges with a EVA PVB SGP TPU interlayer film March 8, 2015
  • Cautions of EVA film safety gazing vacuuming machine March 8, 2015
  • EVAVISION SANDBLASTING WHITE INTERLAYER FILM for laminated safety glass glazing February 27, 2015
  • Ethylene Vinyl Acetate EVA FILM INTERLAYER samples for laminated safety glass November 24, 2014
Interlayer Tech, Proudly powered by WordPress.